服务热线:136-9869-3887
欢迎光临青岛北方天宇工程材料有限公司网站!
金属盖板型

FTM铆钉转角 楼地面变形缝

发布日期:2018-02-01|变形缝生产厂家小编
分享到:
楼地面变形缝的做法

  为何称之为经济实用型FTM盖板型楼地面变形缝,小编为大家解释下具体原因:在所有盖板型楼地面变形缝里,FTM型号属于成本价格最优惠的;在伸缩缝安装中使用广泛;与其它盖板型相比,完成面基本一样;安装工艺方面,此型号产品比较简单。铝合金基座可以安装在地面之上也可以和地面在同一平面,是为大家推荐的楼地面变形缝产品之一。盖板型FTM楼地面变形缝

  楼地面变形缝金属盖板型FTM(可分铆钉型基座和弹珠型基座)采用铝合金型材、铝合金板(或不锈钢板、黄铜板)、不锈钢滑杆及橡胶嵌条等组成的集实用性和装饰性于一体的工业化产品。产品广泛适用于政府机构、高层办公楼、商业建筑、体育馆、公共交通建筑、高标准厂房及高档民宅等。

  楼地面变形缝金属盖板型FTM产品特点有:

  铆钉型铝合金基座特点是滑竿采用铆钉控制在基座导轨里,上下操作空间大,注意的是安装时避免滑竿掉落,中心固定螺丝先拧紧少量丝牙再进行同一固定。

  弹珠型铝合金基座特点是滑竿控制在基座导轨里,安装时不易掉落,弹珠滑动自如。

  盖板自定中心,接合平整

  增加盖板厚度,提高承载能力

  面板可选用铝合金,不锈钢

  盖板型地坪伸缩缝型号:FM,FGM,FOM,FEM,FJM,FTM,F-WM,F-WGM,F-WOM,F-WEM,F-WJM,F-WTM。
Why is called the economical and practical FTM plate type floor deformation joints, Xiaobian to explain the specific reasons: in all the plate type floor deformation joint, FTM type belongs to cost the most preferential price; in the expansion joint is widely used in the installation; compared with other type of cover, surface finish is basically the same; installation this type of products is relatively simple. Aluminum alloy base can be installed on the ground and can be in the same plane with the ground. It is one of the products of ground deformation joint recommended for everyone. Ground deformation joint of a cover type FTM building

Joint metal cover type FTM (ground floor deformation can be divided into rivet type base and bead type base) using Aluminum Alloy profiles, Aluminum Alloy plate (or stainless steel plate, copper) and industrial products in one of the stainless steel slide rod and a rubber strip is composed of a practical and decorative. The products are widely used in government institutions, high office buildings, commercial buildings, gymnasiums, public transport buildings, high standard workshops and high-end residential houses.

The features of the metal cover type FTM products of the ground surface deformation seam are as follows:

The characteristics of rivet type Aluminum Alloy base is used in the control of slider rivet base rail in operation space under the large, attention is to avoid falling slider installation, screw thread and then tighten the amount to the same fixed.

The characteristics of pinball Aluminum Alloy base slider control on the base rail, not easy to fall when installing marbles slide freely.

Self setting center of cover plate

Increase the thickness of the cover plate to improve the bearing capacity

The panel can be made of aluminum alloy and stainless steel.

Cover type floor expansion joint models: FM, FGM, FOM, FEM, FJM, FTM, F-WM, F-WGM, F-WOM, F-WEM, F-WJM, F-WTM.

 

 
上一篇:没有了
下一篇:FTM弹珠转角
[返回列表]
地址:山东省青岛市城阳区黑龙江中路305号    吴经理:136-9869-3887  
Copyright © 2002-2017 xx工程材料伸缩装置有限公司,变形缝厂家 版权所有
技术支持:九鲁网络 合作伙伴:木材破碎机