服务热线:136-9869-3887
欢迎光临青岛北方天宇工程材料有限公司网站!
承重型

地面大承重

发布日期:2018-02-01|变形缝生产厂家小编
分享到:

江西省楼地面变形缝图集

  加厚地面变形缝承重型产品是针对伸缩缝需求承载重型车辆通行而研发的特殊变形缝装置,与传统的铝合金楼地面变形缝相比,基座采用钢板剪折加工而成,可以满足大巴、消防车、叉车等大型车辆负荷,在厂房、停车场等伸缩缝中使用较多。通过增加盖板厚度,提高承载能力,采用滑杆确保变形缝装置变位时仍能保持中心及原有位置。

  与之相似型号有:FDM,FHM,FSM,F-WSM

  联华定制地面变形缝承重型特点:

  比常用的盖板型变形缝更大承载力

  面板可选用镀锌钢板、201不锈钢、202不锈钢、304不锈钢等

  增加盖板厚度,提高承载能力

  盖板自定中心,接合平整,表面可以开凿防滑槽。

The ground deformation joint bearing heavy thickening is a special product for deformation joints of heavy vehicle traffic demand and the development of joint device, and the traditional Aluminum Alloy floor deformation seam, base with steel plate shear and bending processing, can meet the bus, fire trucks, forklifts and other large vehicle load, in the use of more buildings, parking lot other expansion joints. By increasing the thickness of the cover plate to improve the bearing capacity, the sliding rod is used to ensure that the center and the original position of the deformation joint can still be maintained.

The similar models are: FDM, FHM, FSM, F-WSM

Heavy features of Lianhua custom-made ground deformation and seams:

Greater bearing capacity than common cover type deformation joints

The panel can be made of galvanized steel, 201 stainless steel, 202 stainless steel, 304 stainless steel, etc.

Increase the thickness of the cover plate to improve the bearing capacity

The cover plate is self - fixed center, the joint is smooth and the surface can be chilled for antiskid groove.

下一篇:承重型地坪
[返回列表]
地址:山东省青岛市城阳区黑龙江中路305号    吴经理:136-9869-3887  
Copyright © 2002-2017 青岛北方天宇工程材料伸缩装置有限公司,变形缝厂家 版权所有
技术支持:九鲁网络