服务热线:136-9869-3887
欢迎光临青岛北方天宇工程材料有限公司网站!
承重型

3mm高承重型地面转角

发布日期:2018-02-01|变形缝生产厂家小编
分享到:

室内楼地面变形缝的做法

  承重型楼地面变形缝F-WDM(转角)也称为金属盖板型楼地面变形缝,是FDM平面型延伸的产品,主要用于FDM平面同一伸缩缝L型部位,设立的转角型可以保持与平面FDM产品同一高度和边距。

  承重型楼地面变形缝F-WDM(转角)建筑变形缝装置产品特点:

  接合平整,增加盖板厚度,提高承载能力盖板自定中心,现在公司有内高3mm-12mm的铝合金基座,也可定做加工特殊加大加厚承重型钢板基座。

  面板可选用铝合金、不锈钢,表面可以开凿防滑槽。

  FSM,FHM通常可满足1T,2T车辆通行;FDM通常可满足3T,5T车辆通行,遇到大巴和重型车辆通行要根据缝口宽度确定面板厚度。

  采用滑杆确保变形缝装置变位时仍能保持中心及原有位置。

  楼地面变形缝承重型型号:FDM、FHM、FSM、F-WSM。

  承重型楼地面变形缝F-WDM(转角)产品图片如下图所示:

  承重型楼地面变形缝F-WDM(转角)伸缩缝装置是用来遮盖和饰建筑物变形缝的建筑配件,是由铝合金基座、铝合金板(或不锈钢板、黄铜板)、不锈钢滑杆等组成的集承重性和装饰性于一体的工业化产品。产品广泛适用于厂房、道路、停车场等需要重型车辆的伸缩缝部位。

The load-bearing floor deformation joint F-WDM (corner) is also known as the metal cover type building ground deformation joint. It is a product of FDM flat type extension. It is mainly used for the L part of the same expansion joint on the FDM plane. The rotary form can maintain the same height and edge distance with the flat FDM product.

The characteristics of the deformation seams of the F-WDM (corner) building of the ground deformation seam of the bearing type building:

The joint is smooth, the thickness of the cover is increased, the load capacity is increased, the cover is self centering. Now the company has an aluminum alloy base with a high 3mm-12mm and can also be made to make special thickening and load bearing steel plate base.

The panel can be made of aluminum alloy and stainless steel, and the surface can be chilled for antiskid groove.

FSM, FHM usually meet 1T and 2T vehicle traffic; FDM can usually meet 3T and 5T traffic, and when buses are encountered, the thickness of the panel should be determined according to the width of the seam.

The sliding rod is used to ensure that the center and the original position of the deformation joint can still be maintained.

The heavy-duty models of ground deformation and seams: FDM, FHM, FSM and F-WSM.

The F-WDM (corner) product picture of the ground deformation seam of the load-bearing building is shown as shown in the following figure.

F-WDM deformed joints bearing floor (corner) expansion joint device for sewing accessories and decorative cover construction deformation of buildings, is composed of Aluminum Alloy base, Aluminum Alloy board (or stainless steel plate, stainless steel, brass) sliding rod composed of bearing set decorative and industrial products in one. The products are widely used in the expansion joints of heavy vehicles, such as factories, roads, parking lots and so on.

 

上一篇:没有了
[返回列表]
地址:山东省青岛市城阳区黑龙江中路305号    吴经理:136-9869-3887  
Copyright © 2002-2017 青岛北方天宇工程材料伸缩装置有限公司,变形缝厂家 版权所有
技术支持:九鲁网络